Dynomotion

Group: DynoMotion Message: 14810 From: kn6za Date: 5/22/2017
Subject: hide jog increments problem
Hi Tom,

  I have noticed when I create a screen that has all the jog increments hidden, they hide ok at first but after I enter the tool setup page in kmotioncnc, the jog increment check boxes and labled values are showing on the screen again.

  I have gotten around this on my machines by moving the jog stuff out of the view able area, so I don't need this fixed, only want to let you know its happening.

   This could be just a problem with my own equipment, i don't know. Both my lathe and mill have physical control panel controls for jogging so i have attempted to hide all jog info on both machine screens. Both machines do the same reappearing thing.

   Andrew 
Group: DynoMotion Message: 14811 From: Tom Kerekes Date: 5/23/2017
Subject: Re: hide jog increments problem

Hi Andrew,

Thanks for the feedback.

Regards

TK


On 5/22/2017 5:42 PM, kn6za@... [DynoMotion] wrote:
 

Hi Tom,


  I have noticed when I create a screen that has all the jog increments hidden, they hide ok at first but after I enter the tool setup page in kmotioncnc, the jog increment check boxes and labled values are showing on the screen again.

  I have gotten around this on my machines by moving the jog stuff out of the view able area, so I don't need this fixed, only want to let you know its happening.

   This could be just a problem with my own equipment, i don't know. Both my lathe and mill have physical control panel controls for jogging so i have attempted to hide all jog info on both machine screens. Both machines do the same reappearing thing.

   Andrew